Pressure switch for clutch system F210
The clutch system pressure switch (F210) informs the Digiswing control unit whether the clutch system pressure is satisfactory.
Type: open/closed Colour: Green
Switch opened: below 0.55 bar (vacuum pressure too low) Switch closed: above 0.55 bar (vacuum pressure OK)
If the switch is opened, the control unit switches on the Electric Vacuum Pump (V22) and seperates the clutch and brake circuit by closing the priority shift valve, the pump then runs until a specific delay after the switch has closed, and then re-opens the priority shift valve (assuming brake circuit has sufficient vacuum)
Part and ordering information
Part number: 1H0 919 825 A