Tow starting: Difference between revisions
Jump to navigation
Jump to search
Created page with "An Ecomatic can be tow/push started. == Prerequisites == -Battery has sufficient power to operate ECU, electric vacuum pump (to create vacuum), and the clutch final control ..." |
No edit summary |
||
| Line 3: | Line 3: | ||
== Prerequisites == | == Prerequisites == | ||
*Battery has sufficient power to operate ECU, electric vacuum pump (to create vacuum), and the clutch final control element, as well as operate the glow plugs (if the engine is very cold). | |||
*Vacuum system OK. | |||
For example, it is possible the battery is too flat to start the engine, however it still has sufficient power to generate vacuum and operate the clutch. Or, the battery is fine and the starter motor has failed. | For example, it is possible the battery is too flat to start the engine, however it still has sufficient power to generate vacuum and operate the clutch. Or, the battery is fine and the starter motor has failed. | ||
| Line 10: | Line 10: | ||
== Procedure == | == Procedure == | ||
*Two or more people are required. Continue only if it is safe to do so. | |||
*Select neutral | |||
*Turn ignition on, but do not attempt to start the engine. | |||
*Once vehicle has picked up sufficient speed, select 2nd gear and release gearstick immediately. | |||
*The clutch will close automatically and the vehicle will attempt to start the engine using the momentum of the car, accelerate slightly. | |||
*The clutch should re-open to prevent stalling. | |||
*Turn on engine brake mode to prevent engine switching off [k110] | |||
== Remedial Measures == | == Remedial Measures == | ||
Revision as of 01:35, 15 December 2012
An Ecomatic can be tow/push started.
Prerequisites
- Battery has sufficient power to operate ECU, electric vacuum pump (to create vacuum), and the clutch final control element, as well as operate the glow plugs (if the engine is very cold).
- Vacuum system OK.
For example, it is possible the battery is too flat to start the engine, however it still has sufficient power to generate vacuum and operate the clutch. Or, the battery is fine and the starter motor has failed.
Procedure
- Two or more people are required. Continue only if it is safe to do so.
- Select neutral
- Turn ignition on, but do not attempt to start the engine.
- Once vehicle has picked up sufficient speed, select 2nd gear and release gearstick immediately.
- The clutch will close automatically and the vehicle will attempt to start the engine using the momentum of the car, accelerate slightly.
- The clutch should re-open to prevent stalling.
- Turn on engine brake mode to prevent engine switching off [k110]
Remedial Measures
If battery is faulty, replace with a correct replacement without delay. If the starter is faulty, use the correct replacement.